Ethernet RFID Reader is based on TCP/IP, can read RFID cards.This readers can easily connect to network.Installation is very easy.
RFID Reader Features:
- Low-cost method for reading passive RFID tags.
- Built in Antenna
- On-Board Power LED
- Current Requirement <120mA
- Detecting Range 5-15cms.
- High quality PCB FR4 Grade with FPT Certified.
RFID Reader - Applicatons:
- RFID Remote/Web based attendance system
- RFID Remote/Web based smart shopping system
- RFID Remote/Web based medical file tracking system
- RFID Remote/Web based inventory management system
- RFID Remote/Web based access control system -security
- RFID Remote/Web based library management system
- RFID Remote/Web based security guard monitoring system
- RFID Remote/Web based asset tracking system ,
- RFID Remote/Web based vehicle parking system
- RFID Remote/Web based toll gate collection system
- RFID Remote/Web based hotel room access control system .
- RFID Remote/Web based product identification for blind
- RFID Remote/Web based blind indoor navigation system.
- RFID Remote/Web based dual authentication system for software application ,
- RFID Remote/Web based industry supply chain control system
- RFID Remote/Web based smart conveyor
Ethernet Shield W5100 for Arduino:
- With this Ethernet Shield, your Arduino board can be used to connect to internet.
- Can be used as server or client.
- Directly plug puzzle board, no soldering required.
- Controller: W5100.
- This is the latest version of the Ethernet Shield.
- This Arduino Ethernet Shield which is based on the Wiznet W5100 Ethernet Chip gives you an easy way to get your Arduino Online.
- It is directly supported by Arduino official Ethernet Library.
- It adds a micro-SD card slot, which can be used to store files for serving over the network.
- It is compatible with the Arduino Duemilanove (168 or 328), Uno as well as Mega (1280/2560) and can be accessed using the SD library.
- The Wiznet W5100 provides a network (IP) stack capable of both TCP and UDP.
- It supports up to four simultaneous socket connections.
- Use the Ethernet library to write sketches which connect to the internet using the shield.
- Fits all version of Arduino Main board,2009,UNO, mega 1280, mega 2560.
- Size: 7cm x 5.4cm x 2.4cm - 2.76inch x 2.12inch x 0.94inch.
- MAC address: 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED byte mac[] = { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED }
Mega 2560 R3 ATmega2560-16AU Board Features:
LAN Based RFID Reader Block Diagram:- Microcontroller:ATmega2560
- Operating Voltage: 5V
- Input Voltage (recommended):7-12V
- Input Voltage (limits):6-20V
- Digital I/O Pins: 54 (of which 14 provide PWM output)
- Analog Input Pins:16
- DC Current per I/O Pin:40 mA
- DC Current for 3.3V Pin: 50 mA
- Flash Memory:256 KB of which 4 KB used by bootloader
- SRAM:8 KB
- EEPROM:4 KB
LAN Based RFID Reader Screenshot:
