RDL SMART HOME AUTOMATION KIT

OVERVIEW:

The project aims at designing Home automation system using Wi-Fi technology. The devices can be switched ON/OFF using a Mobile through Wi-Fi

RDL Smart Home Automation Kit  Block Diagram:

RDL Smart Home Automation Kit UNO Atmega328 Connection Diagram:

RDL- UNO ATMEGA328 Development Board 3 in 1 Features:

• Atmega328p- controller
• Standard I/O interface for UNO shield.
• Xbee foot print for RF/WiFi communication.
• Inbuilt Micro SD memory card slot for Data logging application.
• Programmable with Arduino open source.
• High quality PCB FR4 Grade with FPT Certified.
• For more details: http://researchdesignlab.com/atmega328-shield.html

FT232 BreakOut  Board Features:

• Simple and convenient design for the hobbyist and developers.
• High speed bridge converting USB to Serial, serial to USB. 
• High quality PCB FR4 Grade with FPT Certified. 
• For more details: http://researchdesignlab.com/4-relay-interfacing-board.html

Serial 3 Channel AC 230V SSR and Dimmer Features:

• Works on AC power supply 230V.
• Load Capacity 12 Amp AC(Up to 2000 Watt)
• Isolated from mains power
• Works from any microcontroller input
• Serial Control (TTL).
• Simultaneous 3 load control with 0-100% dimming.
• Act as 3 channel solid state relay with ON/OFF and  dimming.
• Optional input for Microcontroller or Bluetooth inteface pin TX,RX,5V,GND.
• Application software source code should  be provided.
• High quality PCB FR4 Grade with FPT Certified.
• For more details: http://researchdesignlab.com/serial-3-channel-ac-230v-ssr-and-dimmer.html

4 Relay  Interfacing Board 12V Features:

• LED indication for relay & power supply. 
• Design based on highly proven IC ULN2803 as driver. 
• Direct input 5V microcontroller for relay control.
• High Current (8A) Capability.
• AC or DC Operating Voltages.
• No Leakage Current.
• Eliminates costly isolation relays and wiring.
• High quality PCB FR4 Grade with FPT Certified.
• For more details:  http://researchdesignlab.com/4-relay-interfacing-board.html

Xbee USB Adapter with FT232RL  Features:

• 3.3V and 5V dual power output
• 3.3V and 5V IO compatible
• USB 2.0 protocol
• Needs no external crystal.
• Router and  co-ordintaor indicator led.
• On board reset button.
• LED indicators for RX,TX,PWR and ASSOC signals.
• UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity
• Power Supply USB 5V.
• Single chip USB to asynchronous serial data transfer interface.
• Data transfer rates from 300 baud to 3 Mbaud (RS422, RS485, RS232 ) at TTL levels.
• UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity.
• Integrated +3.3V level converter for USB I/O.
• True 5V/3.3V/2.8V/1.8V CMOS drive output and TTL input.
• High quality PCB FR4 Grade with FPT Certified.
• For more detials: http://researchdesignlab.com/xbee-usb-adapter-with-ft232rl.html

XBee XBeeS68 WiFi Features:  

           

• No configuration needed for out-of-the-box RF communications
• Common XBee footprint for a variety of RF modules
• Fast 250 kbps RF data rate to the end node
• 2.4 GHz for worldwide deployment
• Sleep modes supported for extended battery life
• High quality PCB FR4 Grade with FPT Certified.

2pcs Screwshield Expansion Board :

• Screw directly to the terminal on the thread. Can be plugged into the arduino UNO R3 controller.
• For more details:  http://researchdesignlab.com/2pcs-screwshield-expansion-board-for-arduino.html    

FOR MORE DETAILS: CLICK HERE