OVERVIEW
SERIAL 3 CHANNEL AC 230V SSR AND DIMMER
The board can be used in application where dimming of 110-220v AC power is required like dimming of
bulb or fan.The board can be control with Serial data from any microcontroller
0-100% dimming or ON/OFF control Main power(230v) completely isolated from microcontroller.
FEATURES
- Works on AC power supply 230V.
- Load Capacity 12 Amp AC(Up to 2000 Watt)
- Isolated from mains power
- Works from any microcontroller input
- Serial Control (TTL).
- Simultaneous 3 load control with 0-100% dimming.
- Act as 3 channel solid state relay with ON/OFF and dimming.
- Optional input for Microcontroller or Bluetooth inteface pin TX,RX,5V,GND.
- Application software source code should be provided.
BTA12400 IC
Electrical Characteristics
- Average Power Dissipation of 0.5W
- Operating Temperature +120 degC
- Holding Current (maximum)-30mA
- Latching Current(maximum)-60mA
MOC 3021
It is a 6pin Random Phase optoisolators
TRIAC driver output
TRIAC
from Triode for Alternating Current, is a genericized
tradename for an electronic component that can conduct current in either
direction when it is triggered (turned on), and is formally called a
bidirectional triode thyristor or bilateral triode thyristor.
Applications:
- Solenoid/Valve Controls
- Static ac Power Switch
- Lamp Ballasts
- Solid State Relays
- Interfacing Microprocessors to 115 Vac Peripherals
- Incandescent Lamp Dimmer
- Motor Controls
Electrical
Characteristics
Total Power Dissipation @ TA is 25°is 4.4mW
Storage Temperature Range is -40 to +150 degC
- Average Power Dissipation of 0.5W
- Operating Temperature +120 degC
- Holding Current (maximum)-30mA
- Latching Current(maximum)-60mA
MOC 3021
It is a 6pin Random Phase optoisolators TRIAC driver output
TRIAC
from Triode for Alternating Current, is a genericized
tradename for an electronic component that can conduct current in either
direction when it is triggered (turned on), and is formally called a
bidirectional triode thyristor or bilateral triode thyristor.
Applications:
- Solenoid/Valve Controls
- Static ac Power Switch
- Lamp Ballasts
- Solid State Relays
- Interfacing Microprocessors to 115 Vac Peripherals
- Incandescent Lamp Dimmer
- Motor Controls
Electrical
Characteristics
Total Power Dissipation @ TA is 25°is 4.4mW
Storage Temperature Range is -40 to +150 degC
Applications:
- Solenoid/Valve Controls
- Static ac Power Switch
- Lamp Ballasts
- Solid State Relays
- Interfacing Microprocessors to 115 Vac Peripherals
- Incandescent Lamp Dimmer
- Motor Controls
Electrical
Characteristics
Total Power Dissipation @ TA is 25°is 4.4mW
Storage Temperature Range is -40 to +150 degC
Storage Temperature Range is -40 to +150 degC
