Quick Overview:
LPC2129 is a single-chip 32-bit microcontroller with 256KB on-chip Flash ROM with In-System Programming (ISP) and In-Application Programming (IAP) 16KB RAM having Real Time Clock, Watchdog Timer, General purpose I/O pins. CPU clock up to 60 MHz, On-chip crystal oscillator and On-chip PLL. This IC also supports Interrupt Controller, 2 SPI serial interfaces, Two UARTs, I2C serial interface, PWM unit with up to 6 PWM outputs, Two timers (7 capture/compare channels), 4-channels 10bit ADC, 2 CAN channels.
1. Power supply, 5V-9V
2. Power ON switch
3. USB Programming port **
4. DC 3.3V connectors
5. ARM in built USB port
6. DB-9 serial female connector-1
7. DB-9 serial female connector-2
8. Micro SD memory card connector **
9. Node connector
10. Variable resistor POT
11. CAN bus*
12. 4x1 Keypad
13. 16x2 LCD connectors
14. Node connector
15. 4x4 Keypad matrix
16. 8 way DIP switch
17. Bi-Directional Voltage Level Converter (3.3V-5V)
18. 8x1 LED’s
19. 52 Pin female header for mounting different ARM processors
20. ARM LPC 2129
21. USB to TTL FT232 external connector
22. 4x1 7 Segment display
23. External I2C bus connector
24. Node connectors
25. Stackable header for Arduino Shields.
26. 26 pin raspberry connector.
27. Program/Run Mode selector
28. External SPI bus connector
Features :
- High quality ARM development board.
- Power supply, 9V-12V
- 52 pin Female burg connector for various Arm controller mount.
- I2C bus.
- USB-FT232 Driver.
- Node connectors
- 4x1 7 segment display
- Raspberry Pi expansion connectors.
- Stackable Arduino shields.
- ON/OFF slide switch.
- SPI bus
- DC 3.3V connectors
- DC 5V connectors
- 2- DB-9 (serial) female connector.
- External jumper nodes.
- The MAX232 chip RS232 communication.
- All IO ports pin have extraction and clearly marked.
- On Board Power supply 3.3V,5V,GND.
- On board ISP Programmer.
- 8x1 LED’s
- 8 way DIP switch
- Micro SD memory card slot.
- 6 Channel 5V to 3.3V Bi-directional level converter
- 3 Analog potentiometer.
- 4x1 keypad.
- Reset button.
- 16x2 LCD connectors.
- 4x4 Matrix Keypad.
- Power plug-in DC Socket.
- Test led for Tx, Rx.
- Power ON switch.
- All IO’s are connected by brug stripps for easy connection.
For Sample codes, Schematics & Tutorials CLICK HERE
